Highly depends on what your final goal is. Usually we recommend the usage of 4-7 Azure Kinect cameras for a good recording from all directions. However you can get even better volumetric capture results with more cameras all the way up to 10...

There are two ways to record with more cameras. First way is to get additional USB PCIE cards in order to have more USB ports, but keep in mind that Azure Kinects are very specific about which USB host controllers they support – find o...

This might be because each of your camera has automatic gain control, which can be turned off in Record tab > Color controls ...

There are multiple possible reasons. To ensure that a camera is shown you can try doing these steps: unplug all the cables from the camera, wait for a couple of seconds and plug them all back in. Ensure that no other program is using that ca...

Depends on how many cameras you have and what it is that you’re trying to record. The basic idea is to try to space your cameras evenly, while placing them usually at ~1.5 meter distance from the center of your stage. If you have a lot...

Your cameras might be missing frames most likely because of incorrect USB host controllers (as stated by Microsoft, Windows, Intel, Texas Instruments (TI), and Renesas are the only host controllers that are supported). Another alternative is...

This is usually the fault of USB host controller incompatibility. Azure Kinect only work with a couple of different supported USB host controllers, and with everything else, it either works, works partially or doesn’t work. We have not...