This is usually the fault of USB host controller incompatibility. Azure Kinect only work with a couple of different supported USB host controllers, and with everything else, it either works, works partially or doesn’t work. We have noticed so far that with some USB host controllers, the cameras are good as long as you don’t connect too many cameras/devices to the same USB card even if there are extra ports there.
Search Knowledge Base Articles
Why are my cameras glitching?
Did you find this article useful?
Related Articles
-
How many cameras should I use?
Highly depends on what your final goal is. Usually we recommend the usage of 4-7 Azure Kinect camera... -
How do I connect more cameras?
There are two ways to record with more cameras. First way is to get additional USB PCIE cards in ord... -
Why are the colours between my cameras different?
This might be because each of your camera has automatic gain control, which can be turned off in Rec... -
Why some of my cameras are not shown in the camera list?
There are multiple possible reasons. To ensure that a camera is shown you can try doing these steps:... -
What camera setup should I use?
Depends on how many cameras you have and what it is that you’re trying to record. The basic id...